Storm-drain network design in Kuwait - Fintas

Storm-drain network design in Fintas

Storm-drain network design in Fintas addresses low coastal topography and sandy soil near the sea. We size flows from villas and streets, designing lines with limited slope and final discharge points approved by the municipality.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Fintas is a coastal area with scattered villas on medium plots and very low topography with minimal elevation above sea level. Soil is sandy and quickly saturated, with natural drainage channels nearly absent. This means the drain network cannot rely on steep natural grade, requiring very shallow slopes and carefully sized pipes. Final discharge must follow a municipality-approved direction, often toward a public drain or local retention basin due to the shallow groundwater table.

Fintas lies in Ahmadi governorate, a coastal district near the governorate centre and waterfront facilities.

Ground level in Fintas is no more than 5 metres above sea level, limiting pipe and channel slopes to minimal gradients.

Back to Storm-drain network design

See also: Storm-water drainage in Fintas

What the design covers - Storm-drain network design

What the design covers

Complete design from flow calculation through to construction-ready drawings

  • Runoff calculation

    Sizing the network to the catchment area and surface slopes

  • Pipe diameter selection

    Selecting each pipe section diameter to carry peak flow without surcharging

  • Network routing plan

    Mapping pipe routes to avoid clashes with other service lines

  • Gradient and invert levels

    Setting gradients and invert levels so water flows by gravity throughout

  • Inspection chamber layout

    Positioning and sizing chambers at every junction and change of direction

  • Construction drawings

    Producing dimensioned drawings and level schedules ready for site execution

How it works.

  1. Initial contact

    Call or WhatsApp us to describe the site and request a visit

  2. Site survey

    We visit, record levels, and collect any existing building drawings

  3. Hydraulic calculations

    We calculate flow, select diameters, and set gradients for every pipe run

  4. Drawing production

    We produce fully dimensioned construction drawings with levels and structural details

  5. Handover and review

    We hand over drawings and walk through any revisions before site work begins

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Storm-drain network design in Fintas

Call now
How do you design a drain network in a very low coastal area?

We use very shallow slopes, sometimes as low as 0.5 per cent, with larger-diameter pipes to compensate for lack of grade. We space inspection points close together to prevent water pooling.

Where does stormwater discharge in Fintas because of proximity to the sea?

Discharge goes to a public drain or municipality-approved retention basin, as the groundwater table is too shallow for direct percolation.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works