Storm-drain network design in Dhaher
Storm-drain network design in Dhaher begins with calculating water elevation and flow velocity across the desert terrain. We size the pipes, channels and trench depths to ensure seasonal rainfall drains efficiently from plots and buildings into approved collection wells or wadis.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Dhaher plots are spacious on flat desert terrain with gradual slope toward natural wadis, and most buildings are single villas or light industrial storage with low height. Storm-drain design here depends on surveying the foundation and roof level of the site, calculating the runoff area (flat land with sparse vegetation), then sizing pipes and channels to handle peak rainfall. It also requires coordination with Ahmadi municipality to set the final discharge point and maintain minimum separation distances from other underground utilities.
Dhaher lies in Ahmadi governorate in the desert region near the Saudi border, where natural wadis flow toward seasonal salt flats.
We calculate the runoff coefficient (C) for each site subarea based on impervious surface ratio, vegetation cover and desert soil type.
What the design covers
Complete design from flow calculation through to construction-ready drawings
Runoff calculation
Sizing the network to the catchment area and surface slopes
Pipe diameter selection
Selecting each pipe section diameter to carry peak flow without surcharging
Network routing plan
Mapping pipe routes to avoid clashes with other service lines
Gradient and invert levels
Setting gradients and invert levels so water flows by gravity throughout
Inspection chamber layout
Positioning and sizing chambers at every junction and change of direction
Construction drawings
Producing dimensioned drawings and level schedules ready for site execution
How it works.
Initial contact
Call or WhatsApp us to describe the site and request a visit
Site survey
We visit, record levels, and collect any existing building drawings
Hydraulic calculations
We calculate flow, select diameters, and set gradients for every pipe run
Drawing production
We produce fully dimensioned construction drawings with levels and structural details
Handover and review
We hand over drawings and walk through any revisions before site work begins
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Storm-drain network design
Other services in Dhaher
Questions about Storm-drain network design in Dhaher
Call nowHow do we choose pipe diameter on a desert site with sloping terrain?
We calculate peak runoff flow (Q) from site area, runoff coefficient and rainfall duration, then use Manning's equation to find the diameter giving flow velocity between 0.6 and 2.5 m/s. The natural ground slope helps reduce trench depth.
Can we discharge stormwater directly to the wadi without a collection tank?
Yes, if the municipality approves the discharge point at the designated wadi and we verify water does not flow toward neighbouring property or roads. We draw discharge lines and inspection points for flow monitoring and maintenance.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps