Screed pouring in Kuwait - Zahraa

Screed pouring in Zahraa

Screed pouring in Zahraa prepares the finished floor surface for residential units and newer apartment blocks. We apply a level cement-rich screed mix over the concrete frame to ensure the final finishes sit flat and stable.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Most residential buildings in Zahraa are newer apartments on medium-sized plots, 4 to 6 storeys high, many with tile or marble floors. Screed thickness varies depending on the service runs underneath, especially in kitchens and bathrooms where pipework is denser. We prepare the concrete surface first by cleaning and light wetting, then pour the mix with a gentle slope toward drainage outlets, and check that height tolerances stay within spec before any finish layer is installed.

Zahraa lies in Hawalli governorate, a residential district of medium-rise modern apartment buildings.

We maintain a tolerance of no more than 3 mm per metre of horizontal distance when pouring the level screed.

Back to Screed pouring

See also: Rebar & concrete pouring in Zahraa

What screed work covers - Screed pouring

What screed work covers

Screed for floors and surfaces at any stage of construction or renovation

  • Ground-floor screed

    Level bed over the ground slab before floor finishing is laid

  • Upper-floor screed

    Consistent-thickness screed over suspended slabs on each storey

  • Falls and levelling screed

    Creating precise falls toward drains in bathrooms, kitchens and roofs

  • Wet-area screed

    Moisture-tolerant screed shaped to accommodate drainage gradients

  • Post-demolition screed

    Re-levelling floors after partial demolition or strip-out of old finishes

  • Extension and annex screed

    Levelling annex floors to match the finished level of the existing building

How it works.

  1. First contact

    Call or WhatsApp us describing the floor area and the work needed

  2. Site inspection

    Team visits to measure the area, assess the surface and confirm thickness

  3. Quote and approval

    You receive a detailed quote and we start once you approve it

  4. Preparation and pouring

    Surface cleaned, screed poured and levelled with required falls achieved

  5. Curing and handover

    Layer is wetted and covered to prevent cracking then handed over ready for finishing

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Screed pouring in Zahraa

Call now
How do you prepare the concrete surface before pouring the screed?

We clean the surface of dust and loose material, then lightly spray water to dampen the pores without pooling. This prevents the cement mix from drying too fast and ensures strong adhesion.

Does screed thickness vary depending on where it is in the apartment?

Yes, it is thicker in kitchens and bathrooms because the service pipes are deeper. We calculate the thickness for each area based on the service height and the required drainage slope.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works