Screed pouring in Ardhiya Industrial
Screed pouring in Ardhiya Industrial serves warehouses and workshops with heavy-duty floors that withstand forklift and truck traffic. We lay screeds to precise tolerances based on load requirements and mechanised operations.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Ardhiya Industrial is a warehouse and workshop zone on large plots accommodating buildings 30 to 50 metres long and 20 to 40 metres deep. These facilities need solid, flat floors that withstand forklift loads, heavy machinery and powered equipment. Industrial screed requires assessing the base's load capacity, setting concrete thickness and reinforcement, then pouring with deviation under 2 to 3 mm across 10 metres.
Ardhiya Industrial sits in Farwaniya governorate, a warehouse and workshop zone on large industrial plots.
Ardhiya warehouse floors must have a maximum deviation of 2 mm across 10 metres to accommodate forklifts and machinery.
What screed work covers
Screed for floors and surfaces at any stage of construction or renovation
Ground-floor screed
Level bed over the ground slab before floor finishing is laid
Upper-floor screed
Consistent-thickness screed over suspended slabs on each storey
Falls and levelling screed
Creating precise falls toward drains in bathrooms, kitchens and roofs
Wet-area screed
Moisture-tolerant screed shaped to accommodate drainage gradients
Post-demolition screed
Re-levelling floors after partial demolition or strip-out of old finishes
Extension and annex screed
Levelling annex floors to match the finished level of the existing building
How it works.
First contact
Call or WhatsApp us describing the floor area and the work needed
Site inspection
Team visits to measure the area, assess the surface and confirm thickness
Quote and approval
You receive a detailed quote and we start once you approve it
Preparation and pouring
Surface cleaned, screed poured and levelled with required falls achieved
Curing and handover
Layer is wetted and covered to prevent cracking then handed over ready for finishing
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Screed pouring
Other services in Ardhiya Industrial
Questions about Screed pouring in Ardhiya Industrial
Call nowHow do you pour a warehouse floor level enough to take heavy machinery?
We use laser-calibrated formwork and beams, and pour concrete to a thickness calculated for the machinery loads expected. We keep deviation between 2 and 3 mm across 10 metres.
Can you pour a large warehouse floor in stages?
Yes, we divide large areas into small sections with approved construction joints. Each section is poured precisely and fully cured before the next stage starts, avoiding cracks and settlement.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps