Screed pouring in Kuwait - Adan

Screed pouring in Adan

Adan's screeds span coastal residential buildings and mid-plot areas needing precise concrete levelling. We pour level surfaces with uniform thickness while accounting for the salt-laden humidity affecting concrete durability.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Adan has rows of attached apartments on mid-sized plots and some villas further from the shore. Older buildings often need floor repairs with new screeds over existing slabs, and coastal plots suffer natural concrete cracking from salt and moisture-driven expansion and shrinkage. New projects require extra damp protection on screeds before topping layers are poured. The soil is shallow sand with potential salt-bearing strata.

Adan sits in Mubarak Al-Kabeer governorate, a residential waterfront area near Adan Hospital and the seafront.

Screeds near the shoreline require a damp-proof layer before pouring to limit moisture absorption.

Back to Screed pouring

See also: Rebar & concrete pouring in Adan

What screed work covers - Screed pouring

What screed work covers

Screed for floors and surfaces at any stage of construction or renovation

  • Ground-floor screed

    Level bed over the ground slab before floor finishing is laid

  • Upper-floor screed

    Consistent-thickness screed over suspended slabs on each storey

  • Falls and levelling screed

    Creating precise falls toward drains in bathrooms, kitchens and roofs

  • Wet-area screed

    Moisture-tolerant screed shaped to accommodate drainage gradients

  • Post-demolition screed

    Re-levelling floors after partial demolition or strip-out of old finishes

  • Extension and annex screed

    Levelling annex floors to match the finished level of the existing building

How it works.

  1. First contact

    Call or WhatsApp us describing the floor area and the work needed

  2. Site inspection

    Team visits to measure the area, assess the surface and confirm thickness

  3. Quote and approval

    You receive a detailed quote and we start once you approve it

  4. Preparation and pouring

    Surface cleaned, screed poured and levelled with required falls achieved

  5. Curing and handover

    Layer is wetted and covered to prevent cracking then handed over ready for finishing

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Screed pouring in Adan

Call now
Can you pour a fresh screed over an existing old floor?

Yes, but we first remove the tile and debris, sand the surface, apply a bonding agent, then pour the new screed at uniform thickness.

Does humidity affect screed quality in Adan?

Yes, high humidity and salt cause cracking and deterioration. We use salt-resistant cement and damp-proof barriers before pouring.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works