Foam concrete in Kuwait - Funaitees

Foam concrete in Funaitees

Foam concrete work in Funaitees fills foundation voids and low-level floor gaps in residential and retail buildings on medium-sized plots. The lightweight mix is poured and levelled to ensure a safe, even base for finish layers.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Funaitees contains two to three-storey residential buildings and small ground-floor retail on medium-sized plots. Ground floor slabs usually need levelling before tile or damp-proof layers are laid, and voids beneath tank foundations or between perimeter beams require lightweight fill that does not overburden the foundation blocks. Foam concrete is spread by hand or small pump and levelled carefully to avoid surface cracking.

Funaitees lies in Mubarak Al-Kabeer governorate, a residential district near the urban edge of Mubarak Al-Kabeer.

Funaitees floor slabs do not exceed 6 metres between columns, allowing foam fill of 5 to 10 centimetres with uniform density.

Back to Foam concrete

See also: Rebar & concrete pouring in Funaitees

What the work covers - Foam concrete

What the work covers

Mixed, pumped and finished across roofs, floors, voids and utility trenches in Kuwaiti buildings

  • Roof levelling layer

    Forms drainage falls on flat roofs without adding heavy dead load

  • Void and cavity fill

    Fills under-slab voids, pipe trenches and old tunnels at low pressure

  • Lightweight floor base

    Balances floor levels below screed while reducing load on the structural slab

  • Service trench backfill

    Stable, non-migrating backfill around electrical conduits and drainage pipes

  • Insulating fill layer

    Low density provides partial thermal benefit under Kuwait's intense roof heat

  • Post-demolition fill

    Fills gaps left after removing old services or non-structural demolished elements

How it works.

  1. Call or whatsApp

    Describe the location, approximate area and purpose of the foam concrete layer

  2. Site visit

    We visit, measure the area, check surface condition and assess pump access

  3. Mix spec and quote

    We set the density and strength grade then submit a written quotation

  4. Preparation and pour

    Surface prepared, foam mixed to spec, poured and spread to the required level

  5. Finish and handover

    Level and density checked after setting, site handed over ready for the next trade

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Foam concrete in Funaitees

Call now
Do you fill voids beneath water tanks with foam concrete?

Yes, foam concrete is well suited because it is lightweight and distributes load evenly without overloading the foundation.

What do you do if surface cracks appear after levelling?

We monitor the surface for 7 days and fill any fine cracks with cement mortar before waterproofing and finish layers are applied.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works