Foam concrete in Kuwait - Anjafa

Foam concrete in Anjafa

Foam concrete work in Anjafa focuses on filling voids beneath floors and roof surfaces in multi-storey residential apartment buildings. We mix, pump and finish the foam concrete in place to level the floor and reduce structural load.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Anjafa is a district of older to mid-rise residential apartment buildings, 4 to 8 storeys, with many voids beneath the concrete floors from the initial pour. Foam concrete fills these voids and provides a level surface for final finishing without adding significant weight to columns and walls. Anjafa plots are usually medium-sized with floor-to-first-storey heights between 1.5 and 2 metres, which requires precise pumping of foam concrete to ensure full void fill with no large air pockets.

Anjafa sits in Hawalli governorate, a district of clustered mid-sized residential apartment blocks with solid foundations.

We pump foam concrete at density between 600 and 1000 kg/m³ to ensure complete fill without settlement.

Back to Foam concrete

See also: Rebar & concrete pouring in Anjafa

What the work covers - Foam concrete

What the work covers

Mixed, pumped and finished across roofs, floors, voids and utility trenches in Kuwaiti buildings

  • Roof levelling layer

    Forms drainage falls on flat roofs without adding heavy dead load

  • Void and cavity fill

    Fills under-slab voids, pipe trenches and old tunnels at low pressure

  • Lightweight floor base

    Balances floor levels below screed while reducing load on the structural slab

  • Service trench backfill

    Stable, non-migrating backfill around electrical conduits and drainage pipes

  • Insulating fill layer

    Low density provides partial thermal benefit under Kuwait's intense roof heat

  • Post-demolition fill

    Fills gaps left after removing old services or non-structural demolished elements

How it works.

  1. Call or whatsApp

    Describe the location, approximate area and purpose of the foam concrete layer

  2. Site visit

    We visit, measure the area, check surface condition and assess pump access

  3. Mix spec and quote

    We set the density and strength grade then submit a written quotation

  4. Preparation and pour

    Surface prepared, foam mixed to spec, poured and spread to the required level

  5. Finish and handover

    Level and density checked after setting, site handed over ready for the next trade

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Foam concrete in Anjafa

Call now
What is the void depth beneath apartment floors in Anjafa buildings?

Voids are usually between 30 and 60 centimetres, depending on storey height and buried pipes. We fill them with controlled-density foam concrete.

Does foam concrete affect the strength of foundations and columns?

No, foam concrete is very light and reduces structural load. It is used only for fill and levelling, not for bearing loads.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works