Column pouring in Kuwait - Sharq

Column pouring in Sharq

Column pouring in Sharq demands precision because buildings here are stacked tall on constrained plots near the gulf. We pour columns from ground to roof at uniform diameters and heights to carry lateral loads from wind and seismic forces together.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Sharq has tall tower buildings on narrow plots surrounded by existing skyscrapers, so columns must be thick and use high-strength concrete to bear the loads of many floors. Excavation in Sharq is very deep because buildings rest on rock strata far below, and each column must pierce metres of sandy and gravelly soil before bedrock. We monitor column formwork closely because any deviation affects the alignment of every floor above.

Sharq lies in the Capital governorate between tall residential and commercial towers near Kuwait Towers and the gulf.

Structural columns in Sharq's high-rise buildings are usually 60 centimetres or larger in diameter to carry a single floor's load.

Back to Column pouring

See also: Rebar & concrete pouring in Sharq

What column pouring covers - Column pouring

What column pouring covers

structural columns poured at every level, from ground floor to roof

  • Ground-floor columns

    First-level columns above the foundation with sulphate-resistant specification

  • Upper-floor columns

    Repeated floor columns with starter bars projecting for the next slab

  • Extension and annex columns

    New columns tied into an existing structural frame for annexes or extensions

  • Additional-floor columns

    Columns for a new storey added above an existing villa after structural assessment

  • Basement columns

    Below-grade columns with waterproofing protection against high groundwater

  • Pour supervision

    On-site supervision of pour, vibration and curing to verify specification compliance

How it works.

  1. First contact

    Call or WhatsApp with column count, level and project location

  2. Drawing review

    We review approved structural drawings and confirm concrete and rebar specification

  3. Rebar cage assembly

    Cage assembled with stirrups and spacers then set in the correct position

  4. Pour and vibrate

    Concrete poured early in summer heat and vibrated to remove all air voids

  5. Curing and handover

    Columns wet-cured and covered, then handed over with specification documentation

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Column pouring in Sharq

Call now
How do you maintain column plumb over ten storeys or more?

We set vertical reference columns along the plot edge and verify formwork plumb with laser levels before pouring each floor. Small deviations are corrected at the next floor before they accumulate.

What concrete grade is used for high-rise tower columns?

We use concrete grades 35 or 40 megapascals depending on the expected load and the tower's total height. Stronger concrete lets columns be thinner, freeing up more interior space for residential units.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works