Diwaniya design in Kuwait - Sabah Al-Nasser

Diwaniya design in Sabah Al-Nasser

Diwaniya designs in Sabah Al-Nasser fit medium, regular plots near main roads. We provide architectural and engineering drawings that meet the building code and required setbacks.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Sabah Al-Nasser plots are regular, ranging from 400 to 600 square metres with facades facing straight local roads. Diwanivas here are typically one or two seating rooms under one or two roof spans, 3.5 to 4 metres high. The design respects relatively tight front and side setbacks, with a single guest entrance and a rear service annex. Drawings clearly show load-bearing column positions, short beams, ducts and pipe routes.

Sabah Al-Nasser is in Farwaniya governorate, an ordered residential area with similar-sized plots near the Sixth Ring Road.

Sabah Al-Nasser plots require front setbacks of 4 metres and side setbacks of 2.5 metres minimum per the area's original zoning.

Back to Diwaniya design

See also: Diwaniya construction in Sabah Al-Nasser

What the design covers - Diwaniya design

What the design covers

Architectural and structural drawings taking your diwaniya from concept to permit-ready package.

  • Architectural floor plan

    Accurate layout of seating area, entrance and service zones.

  • Facade and exterior look

    Facade design coordinated with the existing villa style.

  • Structural drawings

    Foundation, column and roof details ready for construction.

  • AC and electrical layout

    AC unit positions, lighting points and outlets fixed at design stage.

  • Pantry and service design

    Service area sized and positioned for large regular gatherings.

  • Municipality submission file

    Full drawing set formatted to Kuwait municipality requirements.

How it works.

  1. Call or whatsApp

    Tell us the plot location and approximate area for the diwaniya.

  2. Site visit

    We visit to measure, confirm constraints and photograph existing conditions.

  3. Concept plan

    A draft floor plan is presented for your review and feedback.

  4. Permit file preparation

    Full drawing set is completed to Kuwait municipality submission standards.

  5. Drawing handover

    You receive printed and digital copies ready for permit submission and construction.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Diwaniya design in Sabah Al-Nasser

Call now
Can the diwaniya be expanded with a separate service annex behind the main building?

Yes, the layout separates the main sitting room from the service annex with a passage or small court. The annex holds a toilet, heater and storage without breaching the required side setbacks.

How many interior columns are typical in a 400-square-metre diwaniya?

Typically two to three columns support the beams and ceiling, positioned to keep sight lines and seating unobstructed. The spacing between columns is usually 5 to 6 metres.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works