Glass-block walls in Kuwait - Mansouriya

Glass-block walls in Mansouriya

Glass-block walls in Mansouriya enhance mixed residential-commercial spaces with transparent, secure and insulating partitions. We install blocks on concrete frames using reinforced mortar and precise metal ties.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Mansouriya is a mixed district combining residential blocks with ground-floor commercial units at 3.2 metres ceiling height and apartments above at 2.8 to 3 metres. Glass-block walls provide visual and acoustic separation between units while maintaining visual and natural ventilation, common in small office spaces. Installation requires balanced mortar mix and skilled metal tie embedding per course to prevent lateral slip and ensure the wall stays plumb over the column span.

Mansouriya sits in the Capital near the co-op and Fourth Ring Road, a dense residential and commercial district.

We check glass-block wall plumb and level every 1.5 metres of height during installation.

Back to Glass-block walls

See also: Block walls in Mansouriya

What the work covers - Glass-block walls

What the work covers

Concrete framing, reinforcement, block setting, jointing and full finish to handover

  • Concrete frame

    Cast concrete perimeter frame carries the full glass-block panel load

  • Internal reinforcement

    Horizontal and vertical rebar ties inside voids prevent panel buckling

  • Block setting

    Units bedded on suitable mortar with consistent course levelling throughout

  • Joint finishing

    Excess mortar scraped and joints raked after setting for a clean finish

  • Edge plastering

    Frame edges plastered and smoothed to blend with the adjacent wall

  • Post-install check

    Panel plumb, level and joint integrity checked before final handover

How it works.

  1. First contact

    Call or WhatsApp us with the location and purpose of the panel

  2. Site visit

    We measure the opening and check the existing structure and site conditions

  3. Quotation

    A detailed quote covering materials, labour and framing is sent to you

  4. Installation

    Frame cast, rebar placed, blocks set, and joints finished and raked

  5. Inspection and handover

    Panel plumb and joint integrity confirmed, then handed over to the client

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Glass-block walls in Mansouriya

Call now
Can glass blocks be cut or drilled after installation?

It is not recommended, as cutting or drilling weakens the block and causes breakage. Doorways and openings must be planned before building and executed during installation.

Do glass-block walls need extra steel reinforcement?

No structural reinforcement bars are needed, but we embed metal ties in the mortar between courses to ensure wall cohesion and prevent partial collapse under pressure or vibration.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works