Block boundary wall in Anjafa
Boundary wall construction in Anjafa requires precise height and thickness calculation to resist Gulf winds and sandy soil. We start with plot marking and deep footings, then raise the blockwork in lifts with vertical and level checks.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Anjafa plots are residential with medium sizes and perimeters ranging from 120 to 180 linear metres, with sandy soil and low moisture overall. The boundary wall here requires a footing starting 80 to 120 cm below ground level to support a 20 cm thick hollow concrete or solid blockwork wall, with a finished height of 150 to 180 cm above natural ground. The municipality sets strict standards for height and deviation; we inspect the footing before raising any block and fill internal voids with cement mortar.
Anjafa lies in Hawalli governorate on the eastern edge, where villas sit on enclosed plots bounded by perimeter walls.
Boundary walls in Anjafa must not be less than 150 cm nor exceed 180 cm in height per municipality bylaws.
What the work covers
Full execution of the perimeter boundary wall from layout marking to finished render.
Boundary layout
Mark the plot boundary accurately before any excavation begins.
Footing excavation and pour
Excavate and pour the strip footing at depth suited to local soil.
Foundation waterproofing
Apply a damp-proof course to block salt and moisture rise into blockwork.
Block laying
Lay block courses plumb and level with bed-joint mesh reinforcement.
Reinforced columns and ties
Cast reinforced concrete columns along the wall to resist lateral loads.
Render and finish
Render both faces smooth and ready for paint or stone cladding.
How it works.
First contact
Call or WhatsApp us to describe your plot and arrange a site visit.
Site survey
We visit to measure the perimeter, assess soil and set the footing depth.
Quotation
A detailed quote is submitted covering quantities, materials and method.
Construction
Footing pour, block laying, column casting and render in sequence.
Handover
We inspect plumb, level and finish with you before final sign-off.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Block boundary wall
Other services in Anjafa
Questions about Block boundary wall in Anjafa
Call nowWhat footing depth suits sandy soil for a boundary wall in Anjafa?
Footing starts 80 to 120 cm below natural ground level, based on soil stability and geotechnical survey. We test the ground before excavation and widen the base for greater stability.
Do you fill the hollow cores of the blocks with cement mortar?
Yes, we inject internal voids with cement mortar to strengthen the wall and prevent water and moisture penetration. This is essential in sandy climates.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps