Studio soundproofing in Hateen
An isolated recording studio in Hateen requires precise acoustic separation from outside and internal noise. We install double walls with absorptive and sound-blocking materials, and test acoustic performance before handover.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Hateen's residential buildings are mid-rise with adjoining apartments and shared corridors and rooftops, meaning noise sources from neighbours, common areas and building systems. A recording studio there needs full wall, ceiling and floor isolation to cut low and high-frequency sound. We use double-layer gypsum board with fibreglass wool and foam absorbers sandwiched between, creating air gaps. Doors and windows get sealed acoustic frames with dual-pane glass and flexible gaskets.
Hateen sits in Hawalli governorate, a residential district of mid-rise apartment buildings built close together.
We measure acoustic isolation with a noise metre to confirm at least 40 decibels of reduction before handover.
What the work covers
Site assessment through full acoustic assembly installation and final isolation check
Acoustic site survey
Mapping all noise paths, flanking routes and existing gaps before design
Decoupled wall build
Independent inner stud wall breaks structural vibration transfer to the shell
Isolated suspended ceiling
Resilient hangers decouple the ceiling board from the slab above
Floating floor layer
Resilient mat under the screed absorbs impact and low-frequency drum energy
Penetration sealing
Electrical, AC and pipe penetrations sealed with acoustic putty and collars
Post-build isolation check
Sound level test after completion confirms the assembly performs as designed
How it works.
First contact
Call or WhatsApp us describing the studio space and the intended use
Site visit
We measure the room, map noise paths and note existing gaps and penetrations
Assembly design
We specify wall, ceiling and floor assemblies with layer counts to meet the target
Full installation
Resilient framing, wool infill, board fixing and sealing every penetration
Test and handover
Isolation level tested on site before final handover to the client
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Studio soundproofing
Other services in Hateen
Questions about Studio soundproofing in Hateen
Call nowHow do you isolate a studio from neighbour noise in an apartment block?
We build double walls and ceilings with absorptive layers and air gaps, and seal doors and windows with acoustic frames, dual-pane glass and flexible gaskets. The air gap is essential for blocking low-frequency sound.
Is wall insulation alone enough for a clean recording studio?
No, walls, ceilings and floors must all be isolated together. Noise travels through solid structures, so we do full isolation with flexible breaks that cut vibrations.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps