Gas leak detection in Kuwait - Hassawi

Gas leak detection in Hassawi

In Hassawi, gas leak detection covers a complete inspection of the gas network from the central meter to every connection inside homes and shops. We use sensitive detectors to locate any seepage before it poses a risk.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Hassawi is a mixed residential area with villas, small apartment buildings and a number of ground-floor shops. Most buildings are of middle age with gas networks distributed from a single meter on the building facade to multiple residential and commercial units. Pipes in this area may be visible on exterior walls or buried in interior partitions, requiring careful inspection of each run from meter to final appliance.

Hassawi is in Farwaniya governorate, a residential neighbourhood mixing villas, apartment blocks and small shops.

Individual gas connections inside residential and commercial units must be isolated with shut-off valves at the entry point for safety assurance.

Back to Gas leak detection

See also: Water leak detection in Hassawi

What the service covers - Gas leak detection

What the service covers

A full scan of the gas network from the meter to every appliance connection inside the building

  • Supply line scan

    Trace the line from the meter to the main distribution point

  • Network pressure test

    Inject controlled pressure and record any drop that indicates a leak

  • Electronic sensor sweep

    Scan every joint and valve with a calibrated electronic gas detector

  • Appliance connection check

    Verify the integrity of hob, heater and all appliance connections

  • Leak point marking

    Mark and document the exact leak location before any repair work

  • Inspection report

    Written report of findings and repair recommendations handed to the owner

How it works.

  1. First contact

    Call or WhatsApp us to describe the issue and set an appointment

  2. Site assessment

    Technician checks the network route, pipe type and number of appliance points

  3. Scan and detect

    Full electronic sensor sweep and pressure test across the entire network

  4. Leak confirmation

    Pinpoint and document the exact location, then isolate the leak point

  5. Report and handover

    Hand over a written findings report and confirm network safety before leaving

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Gas leak detection in Hassawi

Call now
Can gas leaks in pipes buried within walls be detected without breaking them?

Yes, we use thermal probes and ionization detectors on the outer wall surface. If we cannot locate the leak by these means, we may open small inspection openings only at connection points.

Do we need to isolate residential and commercial units before testing?

Yes, we use individual shut-off valves to isolate each unit from the main network during testing. This allows safe inspection of each section without affecting other units.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works