Sewage contractor in Sabhan Industrial
Sewer network work in Sabhan Industrial serves factories and workshops on large plots with heavy wastewater loads. We install piping of sufficient diameter and slope to handle large volumes from industrial discharge.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Sabhan Industrial is a zone of varying-sized factories and workshops on spacious, deep plots. Sewage there requires larger-diameter pipes, often 300 mm or more for main runs, because factories discharge heavy volumes of contaminated water, grease and oils. We need deeper excavation, manholes at short intervals for inspection and cleaning, and we assess pre-treatment if the municipality requires it before connection to the public network.
Sabhan Industrial is located in Mubarak Al-Kabeer governorate, a zone dedicated to heavy factories and industrial workshops.
We use pipes of 300 mm diameter or larger for main sewers in industrial zones to handle heavy loads.
What the service covers
Sewer network installation from internal drain points through buried runs to the public network.
Sewer network installation
Buried uPVC pipe runs at correct gradient from building to public network.
Inspection chambers
Concrete or precast chambers at every junction and change of direction.
Excavation and backfill
Trench digging, sand bedding and compacted backfill after testing.
Public network tie-in
Sealed and approved entry into the nearest municipal inspection manhole.
Flow and pressure test
Full network flow test confirming gradient and zero leakage before closing.
Surface reinstatement
Paving or tiling restoration over excavated areas after work is complete.
How it works.
Contact and survey
Call or WhatsApp to schedule a site survey visit.
Network design
Plot the pipe route, set gradients and confirm chamber locations.
Excavation and pipe laying
Dig trenches, lay sand bed, run uPVC pipes and build chambers.
Testing and tie-in
Run flow test then make the sealed tie-in to the municipal manhole.
Backfill and reinstatement
Layer and compact backfill then restore all surface finishes.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Sewage contractor
Other services in Sabhan Industrial
Questions about Sewage contractor in Sabhan Industrial
Call nowDoes the municipality require pre-treatment of factory sewage before connection to the public network?
That depends on the type of contaminants and oils in the factory's discharge. We review municipality and environmental requirements before design, and may install grease separators or pre-treatment tanks if mandated.
What spacing is required between inspection and cleaning points on main sewer lines?
We place inspection points every 40 to 60 metres on main lines, and closer on narrow branches and bends, to facilitate periodic cleaning and maintenance.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps