What drain cleaning covers
Thorough cleaning of drain lines, gullies and the connected sewer run.
Floor gully clearing
Removes soap, hair and fine sand built up in floor gullies.
High-pressure jetting
Pressurised water jet breaks up hardened scale and grease inside pipes.
Motorised drain auger
Bores through solid blockages in pipes hidden inside walls and floors.
Main drain line flush
Full flush of the drain run out to the external manhole.
Post-clean inspection
Flow test after cleaning confirms the blockage is fully gone.
Condition report
Written note on pipe condition and any faults needing follow-up.
Mistakes that damage drain lines
Repeated chemical use
Caustic drain chemicals erode uPVC joints and leave mineral scale completely untouched.
Ignoring early sewer smell
A sewer odour means buildup has started; delaying cleaning turns slow flow into a full blockage.
Flushing sand down drains
Fine sand settles at pipe bends and builds a hard plug quickly.
Partial cleaning only
Clearing the gully alone without flushing the drain line brings the blockage back fast.
Before you call the technician
Pinpoint which drain is slow
Is only one fixture slow, or are multiple drains in the building draining poorly together?
Check the external manhole
If the outside manhole is full, the block is in the main line, not an interior pipe.
Note when problem started
Gradual slowdown points to buildup; sudden blockage suggests a solid object in the pipe.
Stop pouring grease down
Stop putting grease or oils down the sink before the visit to avoid further hardening.
More in plumber / sanitary technician (24h).
What goes wrong with most plumbing.
Plumbing problems start hidden and end with breaking tiles. These three cost the most.
01Pipes laid in a rush
Pipework rushed before the walls close stays hidden until it starts to leak.
02Leaks you cannot see
A slow leak behind tiles shows up as damp, stains and a higher water bill.
03Nobody answers in an emergency
A burst pipe at night cannot wait for a contractor who has moved on.
The solution?
Pipework, leak detection and maintenance from one licensed company.
Pipes laid in a rushFirst-fix plumbing by the builder
Laid as part of the build, before the walls close.
Leaks you cannot seeWater leak detection
We find the source first.
Nobody answers in an emergency24-hour emergency plumber
Plus regular maintenance contracts after handover.
How it works.
Call or whatsApp
Describe which drain is blocked and how many fixtures are affected.
Appointment confirmed
A visit time is set, or an emergency technician is dispatched right away.
On-site assessment
Technician locates the blockage, identifies its nature and selects the right tool.
Cleaning carried out
Deposits are removed by jetting or auger until full flow is restored.
Test and handover
Flow is tested and a condition report with any recommendations is handed over.
What sets the price.
Pricing depends on where the blockage sits, how deep it runs and which tools the job needs.
Get a quoteBlockage location and depth
A blockage near the gully is quicker to clear than one deep in the main run.
Cleaning method required
Mechanical auger work differs in cost from deploying a high-pressure jetting unit.
Number of drain lines
Cleaning one line differs from flushing the full drain network of a building.
Pipe material and age
Old galvanised iron pipes need more careful handling than modern uPVC lines.
Call-out timing
Emergency calls at night or on holidays are priced differently from regular working hours.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Drain cleaning in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Ministry of Electricity and Water (water and drainage connections)
Questions, answered.
Call nowWhen does a drain line need routine cleaning, not just when it blocks?
Kitchens that drain cooking grease daily and older buildings with narrow pipes benefit from periodic cleaning before buildup causes a full block. Gradual slowdown is a reliable early signal to act.
Is high-pressure jetting safe for uPVC drain pipes?
Yes, when pressure is matched to the pipe diameter and condition. The risk is with old pipes already weakened internally, which is why the technician assesses the line before jetting.
What is the difference between one blocked gully and all drains on a floor running slow?
One slow gully points to local buildup near that opening. Multiple drains running slow together indicate a blockage in the shared main line or in the external drain run leading to the manhole.
Can pipes running under tiles be cleaned without lifting them?
In most cases yes; an auger cable or jetting hose enters through the existing gully opening and reaches pipes hidden under the floor without tile removal, unless the blockage is caused by a collapsed or broken pipe.
Why does a sewer smell return shortly after the drain has been cleaned?
A returning smell usually means a dry trap in a rarely used gully, an uncovered drain opening, or a crack in the drain line allowing sewer gases to rise from the network. Each cause needs a different fix.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps