What jetting covers
Jetting tackles drain lines from the trap to the external manhole connection
Horizontal branch lines
Clears grease and sediment from buried horizontal uPVC drain runs
Vertical stack lines
Flushes vertical stacks blocked with soap scum and mineral deposits
External drain runs
Jets external lines from the building manhole to the public sewer
Roof drain outlets
Removes sand and debris blocking flat-roof drain outlets and downpipes
Inspection chambers
Clears sediment from manhole chambers before a final flow test
Post-jetting flow check
Confirms full flow is restored through every cleared drain point
Equipment and methods used
High-pressure jetting unit
Delivers controlled pressure strong enough to break compacted grease and scale without damaging uPVC or PPR pipes
Rotating jetter nozzle
Sprays water forward and backward simultaneously to scour the full pipe wall
Flexible high-pressure hose
Navigates bends and concealed joints inside walls to reach the blockage point
Clean flush water
Only clean water is used, leaving no chemical residue inside the cleared line
Before you call
Locate the blocked point
Note which drain points are slow or overflow so the crew starts at the right location
Check manhole access
Know where external manholes sit to give the jetting hose direct line access
Stop pouring fats
Avoid putting fats or oils down the drain before the visit to prevent fresh build-up
Tell us the pipe material
Old galvanised iron pipes need lower jetting pressure than modern uPVC or PPR lines
More in drain unclogging.
What goes wrong with most plumbing.
Plumbing problems start hidden and end with breaking tiles. These three cost the most.
01Pipes laid in a rush
Pipework rushed before the walls close stays hidden until it starts to leak.
02Leaks you cannot see
A slow leak behind tiles shows up as damp, stains and a higher water bill.
03Nobody answers in an emergency
A burst pipe at night cannot wait for a contractor who has moved on.
The solution?
Pipework, leak detection and maintenance from one licensed company.
Pipes laid in a rushFirst-fix plumbing by the builder
Laid as part of the build, before the walls close.
Leaks you cannot seeWater leak detection
We find the source first.
Nobody answers in an emergency24-hour emergency plumber
Plus regular maintenance contracts after handover.
How it works.
Call or whatsApp
Describe the blockage location and problem to book a visit
Site assessment
Crew inspects drain points and manholes to map the blocked run
Equipment setup
Jetting unit connected and correct nozzle chosen for the pipe type
Jetting run
Hose inserted and pressure applied to break the blockage and flush debris
Flow test
Water run confirms free flow at every treated drain point
What sets the price.
Quote depends on site factors confirmed during the visit, with no fixed price list
Get a quoteBlocked line length
Longer drain runs require more jetting time and continuous pumping effort
Blockage type
Hardened grease and mineral scale demand higher pressure than soft sediment
Access conditions
Covered manholes or tight access points add to setup and rigging time
Number of drain points
Jetting multiple drain points or lines in one visit affects the overall cost
Call-out timing
Emergency call-outs outside normal hours carry a higher rate than scheduled visits
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
High-pressure drain jetting in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Ministry of Electricity and Water (water and drainage connections)
Questions, answered.
Call nowCan high-pressure jetting damage old uPVC drain pipes?
Standard uPVC handles normal jetting pressure well. Old galvanised iron pipes with internal corrosion are the real concern, so the crew adjusts pressure after checking the pipe condition on site.
Why does the same drain line keep blocking even after repeated clearing?
The most common cause is insufficient fall on the drain run, which lets sediment settle at every flat point. Hard water also accelerates mineral scale build-up inside the pipe wall, narrowing the bore over time.
Does high-pressure jetting work on the external drain line to the public sewer?
Yes, jetting is ideal for external lines from the building manhole to the public sewer connection. The hose enters through the inspection chamber and drives accumulated sand and debris outward along the pipe.
Is jetting alone enough or is a camera inspection needed afterwards?
In most cases jetting followed by a flow test is sufficient. If the same spot blocks repeatedly or there is reason to suspect a pipe fracture, a camera inspection identifies the root cause before further work.
How does Kuwait's summer heat make drain blockages worse?
Extreme heat accelerates evaporation in drain traps, leaving hard mineral deposits. Buried pipes also heat up, which causes grease to coat pipe walls far faster than in cooler months.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps