Asphalt contractor in Kuwait - Anjafa

Asphalt contractor in Anjafa

Asphalt work in Anjafa covers residential roads and access drives between villas on medium-sized plots. We prepare the subgrade and base course, then lay the binder and wearing course to withstand Kuwait's intense heat.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Anjafa is a relatively older villa area where plot depths range from 25 to 35 metres and the soil is natural clay and sand. The residential roads here are narrow and need careful asphalt laying to prevent cracking from sharp thermal swings in summer. We remove the existing wearing course, check drainage slope on both road shoulders, then lay the base and binder courses with properly graded aggregate compacted to 15, 20 centimetres depth before the final wearing course.

Anjafa sits in Hawalli governorate, an older villa district with narrow roads that demand careful asphalt work.

Anjafa's residential roads are 6 to 8 metres wide and require a combined binder and wearing course of at least 5 centimetres thickness.

Back to Asphalt contractor

See also: General contracting in Anjafa

What the asphalt work covers - Asphalt contractor

What the asphalt work covers

Ground preparation, base course, binder and wearing course for any paved area.

  • Villa driveways

    Full driveway paving from kerb to garage door.

  • Car parks

    Parking areas graded for drainage under vehicle load.

  • Private roads

    Internal roads for residential compounds and warehouse sites.

  • Patching and resurfacing

    Cut out damaged sections and relay to match existing grade.

  • Drainage gradients

    Precise crossfall layout to move rainwater away from foundations.

  • Kerbs and aprons

    Concrete kerb and apron installation before asphalt is laid.

How it works.

  1. Call or whatsApp

    Share the location and rough area so we can schedule a site visit.

  2. Site inspection

    We measure the area, assess the base, and check drainage needs.

  3. Quote and contract

    Detailed quote covering layer specs and materials, then contract signed.

  4. Preparation and paving

    Base grading, compaction, then hot-mix laying and roller passes.

  5. Handover and check

    Gradients and surface finish checked with the owner before final handover.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Asphalt contractor in Anjafa

Call now
How do you prevent asphalt cracking in Anjafa's heat?

We use an asphalt mix formulated for hot climates with adequate base course thickness, and carefully slope the drainage to prevent water pooling beneath the surface that accelerates deterioration.

Do you remove the old asphalt before laying new work?

Yes, we fully remove any existing wearing course, inspect the subgrade and drainage, and confirm proper slope before laying new base and binder layers.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works