Boundary walls & gates in Sharq
Boundary walls and gates in Sharq serve luxury villas and residential buildings on spacious plots near the sea. We select salt-resistant and moisture-proof materials and pour deep foundations that withstand harsh coastal conditions.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Sharq is an upscale residential area combining large villas and apartment buildings on plots ranging from two to five thousand square metres, and proximity to Sharq Marina means direct exposure to salt spray and seasonal moisture. Walls here need extra moisture and salt barriers at the foundation base and on the surface itself. Most Sharq plots have significant depth and clear side boundaries, allowing us to design gates with higher finish standards and install double-sealed metal frames.
Sharq sits in the Capital near Kuwait Towers, Sharq Marina and the National Bank head office.
Coastal wall foundations in Sharq must reach at least two metres depth with reinforcement protected by dense concrete cover against chloride penetration.
What we build
Perimeter walls, retaining walls, parapets and gates for every plot type.
External boundary wall
Block perimeter wall on a strip footing with reinforced concrete tie columns at regular intervals.
Stone boundary wall
Natural or reconstituted stone face applied over a concrete block core wall.
Reinforced-concrete wall
Fully cast RC wall for sites requiring high structural strength or significant wall height.
Retaining wall
Resists lateral soil pressure where the plot level changes or a slope needs to be held.
Rooftop parapet wall
Block or RC parapet tied into the roof slab around the perimeter for safety and privacy.
Gates and vehicle entrances
Pedestrian and vehicle gates on galvanised steel posts set in concrete with locks.
How it works.
Call or whatsApp
Describe the plot, boundary length and gate requirements.
Site visit
We measure the boundary and check soil and access conditions.
Drawing and quote
We produce a layout plan and an itemised price.
Construction
Footings dug, columns cast, wall built, gates fitted and set.
Handover
Plumb, gate operation and finish checked before formal handover.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Boundary walls & gates
Other services in Sharq
Questions about Boundary walls & gates in Sharq
Call nowHow do you protect a wall from salt spray and moisture near the sea?
We use sulphate-resistant cement and apply a thick bituminous waterproofing layer on the outer face and lower half of the body. The foundation must be deep and reinforced at closer spacing to reduce water and salt penetration.
Can a decorative iron gate be installed on a wide plot with a garden?
Yes, and it is common in Sharq. We design the gate at a height proportional to the wall on strong hidden concrete columns within the structure, with clear expansion joints to accommodate seasonal ground movement.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps